Clean the Bissell Crosswave Pet Pro after every use to prevent odors, protect performance, and extend its lifespan. Empty both tanks, rinse removable parts, clean the brush roll, and allow everything to dry completely before reassembly.
Regular floor cleaner maintenance improves suction and cleaning efficiency. According to industry estimates, proper maintenance can extend appliance lifespan by up to 30%, while regular cleaning also reduces unpleasant odors caused by trapped debris. Therefore, keeping your Bissell Crosswave Pet Pro clean helps deliver consistent performance every time you clean your floors.
Why Cleaning the Bissell Crosswave Pet Pro Matters
The machine collects pet hair, dirt, dust, and dirty water during every cleaning session. Consequently, leftover debris can affect suction and create unpleasant smells.
Routine cleaning also protects important internal components. As a result, your vacuum continues working efficiently while reducing unnecessary wear.
Items You Need Before Cleaning
Gather everything before starting the cleaning process. This preparation saves time and helps avoid missing important steps.
- Warm water
- Mild dish soap
- Soft microfiber cloth
- Soft cleaning brush
- Small towel
- Clean sink
Turn Off and Unplug the Machine
Always switch the machine off before cleaning any component. Next, unplug it from the electrical outlet for complete safety.
Never clean electrical parts while the appliance remains connected. This simple habit protects both you and the machine.
Empty the Dirty Water Tank
Remove the dirty water tank by pressing the release button carefully. Then carry the tank directly to the sink.
Pour the dirty water into the drain immediately after every cleaning session. Afterward, rinse the tank thoroughly with warm water until completely clean.
Clean the Dirty Water Tank Filter
The filter traps fine debris during normal operation. Therefore, cleaning it regularly helps maintain proper airflow.
Remove the filter according to the user guide instructions. Then rinse it gently under running water without using harsh chemicals.
Wash the Clean Water Tank
Empty any remaining cleaning solution before storing the machine. Fresh solution should always replace old liquid during future use.
Rinse the clean water tank with warm water several times. Finally, let the tank air dry before reinstalling it.
Remove and Clean the Brush Roll
Take Out the Brush Roll
Open the brush window carefully using the release mechanism. Next, lift the brush roll from its compartment.
Remove wrapped pet hair with your fingers or small scissors carefully. Avoid damaging the brush bristles while removing tangled debris.
Wash the Brush Roll
Rinse the brush under warm running water until clean. Meanwhile, rotate it slowly to remove hidden dirt completely.
If stubborn residue remains, use mild dish soap carefully. Then rinse thoroughly until no soap remains.
Clean the Brush Chamber
The brush chamber often collects pet hair and sticky debris. Therefore, inspect the compartment after every cleaning session.
Use a soft cloth or small brush to remove buildup. Afterwards, wipe the area with a damp microfiber cloth.
Wipe the Vacuum Exterior
Dust and fingerprints collect on the outer housing over time. Fortunately, cleaning the surface requires only a damp cloth.
Never spray water directly onto the machine body. Instead, wipe gently while avoiding electrical connections.
Check the Vacuum Nozzle
Inspect the nozzle opening for trapped debris or pet hair. Even small blockages can reduce cleaning performance.
Remove visible debris carefully using your fingers or a soft brush. Afterwards, wipe the nozzle with a clean cloth.
Clean the Self Cleaning Tray
The storage tray also collects dirty water after every use. Therefore, wash it regularly to prevent odor buildup.
Rinse the tray with warm water and mild soap. Then dry it completely before placing the machine inside.
Allow Every Part to Dry Completely
Air drying prevents mold and unpleasant smells from developing. Consequently, every removable part should dry naturally before assembly.
Place the components on a clean towel in a ventilated space. Avoid direct sunlight because excessive heat may affect some materials.
Reassemble the Machine
Install every completely dry component back into its original position. Double check each part before storing the machine.
Ensure the brush roll spins freely after installation. Proper assembly helps maintain smooth operation during future cleaning sessions.
How Often Should You Clean the Machine?
Cleaning frequency depends on how often you use the vacuum. However, basic maintenance should happen after every cleaning session.
- Empty both tanks after every use.
- Rinse the brush roll after every use.
- Clean the brush chamber weekly.
- Inspect filters every week.
- Deep clean the entire machine monthly.
Common Cleaning Mistakes to Avoid
Several simple mistakes reduce cleaning performance over time. Fortunately, avoiding them requires only consistent maintenance habits.
- Leaving dirty water inside overnight
- Storing wet components
- Ignoring tangled pet hair
- Using harsh chemical cleaners
- Skipping filter cleaning
- Reassembling damp parts
Signs Your Bissell Crosswave Pet Pro Needs Cleaning
Watch for noticeable performance changes during regular cleaning sessions. These warning signs usually appear before serious problems develop.
- Reduced suction power
- Unpleasant odors
- Dirty streaks on floors
- Brush roll stopping frequently
- Visible debris inside the chamber
Storage Tips After Cleaning
Store the machine indoors in a cool and dry location. Good storage conditions protect internal components from unnecessary moisture.
Keep both tanks empty during storage whenever possible. This habit helps prevent bacteria growth and unpleasant odors.
Conclusion
Cleaning the Bissell Crosswave Pet Pro regularly keeps your floors cleaner while protecting your investment. Following these simple maintenance steps after every use improves performance, reduces odors, and extends the machine’s working life.
Start using this cleaning routine today, and your vacuum will continue delivering dependable results for many years.
Frequently Asked Questions
How often should I clean the Bissell Crosswave Pet Pro?
Clean the tanks and brush roll after every use.
Can I wash the brush roll with soap?
Yes, mild dish soap is safe for removing stubborn dirt.
Should I leave water inside the clean tank?
No, always empty the clean water tank before storage.
Why does my machine smell after cleaning?
Stored moisture or leftover debris usually causes unpleasant odors.
Can I reassemble the machine while parts are wet?
No, every removable part should dry completely before reassembly.
